The Volupe blog, by email
Simcenter know‑how, straight from our engineers
One short email each time one of our application specialists publishes an article. Most are published on a Friday. Meshing, solver settings, structures, optimisation and what changed in the latest release.
We use your address only to send these emails and never pass it to Siemens or other partners. Every email has an unsubscribe link. Privacy policy
The latest articles
All 326 on the blog
Florian Vesting · HEEDSHEEDS 2604 Enhancing the Neural Network BuilderSimcenter HEEDS 2510 could already build neural network surrogates directly from study data.…
Johan BernanderSimcenter User Conference 2026 – Here’s what you missedAt the end of last week, we at Volupe hosted what has now arguably been established as an…
Robin Victor · STAR-CCM+Meshing a cylinder in Simcenter STAR-CCM+Directed mesher, polyhedral cylinder option or 2606 trimmer template: meshing cylinders in…
Randi Franzke · STAR-CCM+Heat transfer coefficients in Simcenter STAR-CCM+Convectional cooling is generally governed by Newton’s law of cooling, which states that the…
Johan Dahlberg · SimLabSimcenter SimLab thermal and structural simulationsHow to run a coupled thermal and linear static analysis in Simcenter SimLab, with Simcenter…
Florian Vesting · Simcenter HEEDS 2510 could already build neural network surrogates directly from study…Johan Bernander · At the end of last week, we at Volupe hosted what has now arguably been established as an…Robin Victor · Directed mesher, polyhedral cylinder option or 2606 trimmer template: meshing cylinders…What to expect
Short emails, one article each
The article
Its title, its main image and two lines from it, with a link to read it on volupe.com.
Nothing else
Just the article. No partner offers, and no new article means no email.
Your call
Every email has an unsubscribe link. You can also write to support@volupe.com and we will unsubscribe you.
Who writes
The specialists who answer your technical questions
Every article in the last 12 months was written by one of these eight application specialists, the people customers contact first about the tools they write about.
- Robin VictorSTAR-CCM+
Fabian HasselbyAmesim, Flomaster
Christoffer JohanssonFLOEFD, Flotherm, STAR-CCM+- Florian VestingHEEDS, STAR-CCM+
- Johan BernanderSTAR-CCM+
Viktor HultgrenSimcenter 3D- Johan DahlbergHyperMesh, OptiStruct, SimLab
- Randi FranzkeSTAR-CCM+
Questions
Before you subscribe
How often will I hear from you?
Once for each new article. We published 45 in the 12 months to October 2026, and since January 2025 three in four were published on a Friday.
Can I choose topics?
No. You get every article, from CFD to structures and system simulation.
What do you do with my address?
We use it only to send these emails, and we never pass it to Siemens or other partners. Section 2.4 of our privacy policy explains what we store and for how long.
I use Simcenter every day. Is this for me?
Recent examples: meshing a cylinder in Simcenter STAR-CCM+, time-step selection in a conjugate heat transfer analysis, and knowing when a Pareto front has stopped moving.
Get the next article by email
We use your address only to send these emails and never pass it to Siemens or other partners. Every email has an unsubscribe link. Privacy policy